WYINAQUA WY30-01E Dual-Stage CO₂ Regulator with Timer

WYINAQUA WY30-01E is a dual-stage CO₂ regulator for aquariums, featuring two large pressure gauges, an electric valve and a built-in programmable timer. It allows precise pressure adjustment and automatic CO₂ ON/OFF control according to a preset schedule.

The regulator features a W21.8 inlet thread, a 6 mm CO₂ tubing outlet and a modular design supporting up to 8 bubble counter modules.

WYINAQUA WY30-01E – Dual-Stage CO₂ Regulator with Timer

WYINAQUA WY30-01E is a dual-stage CO₂ regulator designed for planted aquariums and aquascaping systems where precise and controlled CO₂ delivery is required.

The model combines dual-stage pressure regulation, two large pressure gauges, an electric valve and a built-in programmable timer. This allows you to adjust the working pressure while also automatically controlling when CO₂ is supplied according to a preset schedule.

Dual-Stage CO₂ Pressure Regulation

WY30-01E uses a dual-stage design for pressure regulation. The main adjustment is performed using the central adjustment knob, allowing the working pressure to be set according to the requirements of the CO₂ system.

The dual-stage construction is suitable for aquariums where stable and controlled CO₂ delivery is important.

Built-in Programmable Timer

One of the key features of the WY30-01E is its built-in programmable timer.

The timer controls the electric valve and allows you to set specific times for automatically turning the CO₂ supply on and off.

This means that no separate external timer is required to control the CO₂ valve. The operating schedule can be programmed directly through the control module integrated into the regulator.

This is particularly convenient for planted aquariums, where CO₂ delivery is normally coordinated with the daily lighting schedule.

Electric Valve

WY30-01E features an electric valve for automatic control of the CO₂ flow.

The valve is controlled by the built-in timer and allows the CO₂ supply to be automatically stopped and restored according to the programmed schedule.

Two Large Pressure Gauges

The regulator is equipped with two large pressure gauges, making it easier to monitor the pressure within the CO₂ system.

The large gauge faces allow the readings to be viewed quickly and conveniently during setup and everyday use.

W21.8 Inlet Thread

This version of the WYINAQUA WY30-01E features a W21.8 inlet thread for connection to a compatible CO₂ cylinder.

Before installation, make sure that the thread on your CO₂ cylinder is compatible with W21.8.

Quick-Connect Design

WY30-01E features a quick-assemble design, making installation and configuration of the CO₂ system easier.

The regulator is designed for use with 6 mm CO₂ tubing.

Modular Construction

The modular design allows the system to be expanded according to the aquarist's needs.

Up to 8 bubble counter modules can be added to the regulator, allowing a multi-line CO₂ system to be configured.

The first module is replaceable, while the modular construction provides two connection options.

Precise Pressure Adjustment

The central adjustment knob allows the working pressure of the system to be adjusted according to the requirements of the aquarium.

This makes the WY30-01E suitable for different planted aquarium and aquascaping configurations.

Aluminum Construction with Anodized Finish

The regulator body is made from aluminum alloy and features an anodized Gun Gray finish.

The compact construction combines functionality, durability and a modern appearance suitable for contemporary aquarium systems.

Suitable for Planted Aquariums and Aquascaping

WYINAQUA WY30-01E is designed for use in CO₂ systems for planted aquariums.

The combination of dual-stage pressure regulation, two pressure gauges, an electric valve and a programmable timer provides convenient and automated control of CO₂ delivery.

The modular design also makes it suitable for more complex systems where one CO₂ source is used to supply several separate lines.

How Does the WY30-01E Work?

The CO₂ cylinder is connected to the regulator using the W21.8 thread.

The regulator reduces the gas pressure and allows the working pressure to be adjusted using the central adjustment knob.

After the pressure has been set, CO₂ flows through the outlet to the other components of the system, such as the bubble counter, CO₂ tubing and diffuser.

The electric valve controls the CO₂ supply, while the built-in timer determines when the system is switched on or off according to the programmed schedule.

Key Advantages

• Dual-stage CO₂ pressure regulation
• Built-in programmable timer for automatic ON/OFF control
• Electric valve for automated CO₂ delivery
• Two large pressure gauges for easy pressure monitoring
• Central adjustment knob for pressure adjustment
• W21.8 inlet thread
• 6 mm CO₂ tubing outlet
• Quick-assemble design for easy connection
• Modular construction supporting up to 8 bubble counter modules
• Replaceable first module
• Aluminum construction with anodized finish
• Suitable for planted aquariums and aquascaping

Who Is the WYINAQUA WY30-01E Suitable For?

The WYINAQUA WY30-01E is suitable for aquarists who want precise and automated control over CO₂ delivery in a planted aquarium.

It is suitable for:

• Planted aquariums
• Aquascaping systems
• Aquariums requiring controlled CO₂ delivery
• Automated CO₂ systems
• Multi-line CO₂ configurations
• Aquarists looking for a regulator with a built-in timer

FAQ

What is the inlet thread of the WYINAQUA WY30-01E?

The WYINAQUA WY30-01E features a W21.8 inlet thread and is designed for compatible CO₂ cylinders.

Does the WY30-01E have a built-in timer?

Yes. The WY30-01E features a built-in programmable timer that controls the electric valve and allows automatic ON/OFF control of the CO₂ supply.

Is a separate timer required?

No. The regulator has a built-in programmable timer for controlling the electric valve.

How many pressure gauges does the regulator have?

The WY30-01E has two large pressure gauges for monitoring the CO₂ system.

What size CO₂ tubing is used?

The regulator has a 6 mm outlet for CO₂ tubing.

Can the regulator be used for multiple aquariums?

Yes. The modular design supports up to 8 bubble counter modules, allowing a multi-line CO₂ system to be configured.

Is the WY30-01E suitable for planted aquariums?

Yes. The regulator is designed for controlled CO₂ delivery and is suitable for planted aquariums and aquascaping systems.